The
MW1 MightyKool is all that is normally
needed for any cooling project, however when the Flex
Hose Kitis used there could be some advantage using the
12% extra velocity of the MW2.
The MightyKool
Model MW2 has Three Double Ball Bearing Brushless Motors, which
produce over 2,300 feet per minute velocity on high speed. This
higher velocity is normally never needed as the MW1 with a velocity
of 2,000 feet per minute is rarely ever used on high speed. However
as already mentioned if the Flex Hose
Kit is required to get the cool air where it is needed most,
then the higher velocity of the MW2 could be of some advantage.
The MW2 has all the basic advantages as the MW1
in all other aspects. As either the MW1 or MW2 is the answer if
you want the Coolest Air from an Evaporative Cooling System for
your RV, Boat, or even Vehicle in the DRYER Climates of the World.
The Secret to the Cooling System of the MW2 & MW1 is the single
Custom Cooling Filter Pad! For HUMID areas consider the "Ice Water" models.
You will appreciate the small versatile size of the MW2 unless
you think something must be large to be worth the money! Our engineers
designed this System to produce more cool air than any other comparable
system that is up to five times larger. Engineers didn't design
the Jet Engine to be larger than Piston Engines, just more powerful.
The single Custom Cooling Pad should be changed every few hundred
hours so that you may continue to enjoy Cooler Air than any other
portable Evaporative Cooler including our own Swampy Models.
The Internal water container of the MW2 holds from one to three
hours of cooling, however like the MW1 is also has an Automatic
Filling System through a float. The float may be hooked to an
external water source like our Water Kit if you do not want to
add water every one to three hours. To top this off you can also
operate the MW2 in your home on 110-volts with the optional AC/DC
Converter. You may wish to consider looking at these inexpensive
Options as Shipping & Handling is included Free with your
original order. MW2 Options Using powerful Triple Brushless Double Ball Bearing
Motors this Model merely sips power while streaming cool crisp
air where & when you need it. The Three Motors have the capacity
to produce over 200 cubic feet per minute (cfm) at a velocity
of 2,300 feet per minute with a noise level of 59 dBA on high
speed, which is the noise level of normal speech. If you can visit
while riding in a commercial jet aircraft, you can easily visit
while enjoying the MightyKool's cool air or let it hum you to
sleep negating the outside noises. You can adjust the level of
power you prefer with the three-speed switch.
I received the Swampy MW1 on Wednesday.
Your communication and shipping on my order were accurate and
very prompt. The MW1 arrived well labeled and packed. The MW1
is easy to use. The fan is quiet and really moves a lot of air!
Initial testing at 10% humidity and 81 degree ambient temperature
produced an output vent temperature of 62 degrees. With the fan
set on medium speed this was more than adequate to cool the occupants
of our conversion van. The MW1 is very well constructed. I congratulate
you on an excellent design carried through with quality parts
and an attention to detail. For those who need a compact 12 volt
"swamp cooler" I can recommend the MW1. Thank You, L.J.
Morristown, AZ (They travel extensively & use the MW1 primarily
for camping including sleeping in their Van)
"Dear Swampy, We just wanted to drop you a line to tell you
how well our Mightykool (MW1) worked for us in our trailer on
the Playa at Black Rock City. We run off of solar so this was
a great way to cool off and be able to nap during the 90 degree
days. Thanks," C. and C. Jackson, WY
The MightyKool Models use a Custom Cooling Pad System
which is the Secret to it's Cooling Power, thereby eliminating
the typical pump always necessary in other evaporative coolers.
This saves energy and allows the MW2 to be down sized while producing
even cooler air that has always been associated with our Swampy
Models which use a pump. Perfect Evaporation occurs in the MW2
resulting in cooler temperatures in either dry or humid conditions
as a pump adds either too much or too little water, as there is
no control on what is needed.
The MightyKool MW2 Model on High speed moves about the
same amount of forward airflow as our very popular Swampy
Models S154 or T154 do on Medium Speed at a fraction of the energy
use. Be certain to order a set of Custom Filter Pads with your
order, as they should be changed once or twice during the season
or every 200 to 300 hours of cooling.
"I finally got a chance to use the Swampy MW1 over the TH
of July weekend in 90-95 degree weather. This thing RULES! It
kept my whole camper cool on a medium setting and was turned down
to low at night. I am so impressed with the way it performed,
it was worth every dollar! Thanks again for all your help!"
C. E. Palisade, CO.
I received my Mighty Cool and it's a pretty awesome little contraption.
I have only used it twice now for short periods of time, but so
far am very pleased. I am excited to use it on a weekend camping
trip coming up in my trailer and later on at Burning Man. Thanks!!
A. M. Grand Junction, CO.
Use these in dry climates and you will have cool crisp air streaming
at you for 50 to 80 hours without recharging the typical 105 amp
hour Deep Cycle Battery you choose to purchase (we do not furnish
batteries). This is the only evaporative cooler that has been
used rather successfully in more humid climates by using water
only, if you do not want to deal with our "Ice"
Models. If you wish you may click on Testimonials
regarding the MightyKool in Humid Areas. These Models will also operate efficiently on your
Solar System, with the MW1 using only 11.3 to 21.4 watts on 12.6-volts!
The MightyKool holds enough water to operate for two to four hours
and you can even add a few ice cubes if you so desire. The MW2
comes standard with a float allowing a connection it to an Outside Source of water for unlimited hours
of use.
What are the Dimensions, Amperage Draw and Water
Capacity?
One gallon (3.75 liters) of water will last around two
to three hours in the daytime and four to five hours during the
night when used for evaporative cooling in dry desert climates.
The "Ice Water" models are capable of using from 10
pounds (4.5 kilograms) up to 20 pounds (9.0 kilograms) of ice
per hour depending on the ambient temperature and day or night
operation.
A 105 Deep Cycle battery, "not being charged", allows
the MW1, MW2 or WL/R to operate for 50 to 80 hours and the "Ice
Water" models will operate for 25 to 35 hours before the
battery needs charging. The Swampy Models will operate about 8
hours before the battery would need charging as they draw more
energy.
Evaporative
Cooler Models typically use Water only
& the Model AC 12 uses Ice only
The M200, M400, MK3, MK4,
MG3, IM30 & IM20 Provide; Dual Air Conditioning using Ice
or Water
All Dual Systems automatically
dispose of the excess condensation collected
"I received the order
and we used the Mighty Kool three nights on our trip. It was very
humid and hot out so I'm not sure they had the best chance to
work. From what they did do, they worked well enough to keep us
comfortable in very uncomfortable situations. I think they could
have put out much cooler air but then again the humidity was at
100% the entire time. It was very easy to pack the Mighty Kool
to the camp and set it up with the battery and ran very well.
I can not believe that the small units put out so much air. The
fans on them work great! I just wish the humidity was not so high.
On a scale from 1 to 10, I would have to give it an 8, maybe an
8.5. I will definitely be back or if I know anyone who could use
your services, I will not hesitate in reccomending your company.
Again thank you for everything!!! Very Sincerely, Rebecca L." from Indiana.
The MightyKool
Model MW2 has Three Double Ball Bearing Brushless Motors, which
produce over 2,300 feet per minute velocity on high speed. This
higher velocity is normally never needed as the MW1 with a velocity
of 2,000 feet per minute is rarely ever used on high speed. However
as already mentioned if the Flex Hose
Kit is required to get the cool air where it is needed most,
then the higher velocity of the MW2 could be of some advantage.
are
Proudly made in the USA