Model MW1, MW2 or the WIN
are the answer if you want the Coolest Air from an Evaporative
Cooling System for your Camper, Boat, or even Vehicle Sleeper
in the Dryer Climates of the World. The Secret to the Cooling
System of these three is the single Custom Smart Cooling Filter
Pad! For HUMID areas consider the MW2
with the Flex Hose Kit or one of the
"Ice Water" models if providing
ventilation is not possible.
You will appreciate the small versatile size of the MW1
or the MW2 unless you think something
must be large to be worth the money! Our engineers designed this
System to produce more cool air than any other comparable system
that is up to five times larger. Engineers didn't design the Jet
Engine to be larger than Piston Engines, just more powerful. Dimensions
You do not typically need the MW2,
even though it has 15 to 20% more power unless you are considering
the Flex Hose Kit as the MW1
or WIN will do all you need for
cooling you in most boats, tents or campers in dry climates. Just
plug in the The 10 foot power cord and add water.
9 ¼ x 8 x 7 ¼
Centimeters=24.4 x 20.3 x 18.5
MW2 Inches 10 ¼
x 8 x 7 ¼
Centimeters 28.6 x 20.3 x 18.5
12 ½ x 9 ¾ x 10 ½
Centimeters=31.7 x 24.7 x 26.7
The single Custom Cooling Pad inside is the reason the MW1 Cools!
Therefore it should be changed every two to four hundred hours,
or at least once a season, so that you may continue to enjoy Cooler
Air than any other portable Evaporative Cooler including our own
The Internal water container of the MW1 holds from one to three
hours of cooling, however it also has an Automatic Filling System
through a float. If it is quite humid you might consider leaving
the water out and use the MW1 as a energy efficient fan as there
is enough moisture in the air that the fan would feel quite refreshing. The float may be connected to an external water
source like our Water Kit if you do not want to add water every
one to three hours. To top this off you can also operate the MW1
in your home on 110-volts with the optional AC/DC Converter. You
may wish to consider looking at these inexpensive Options as Shipping
& Handling is included Free with your original order. MW1 Options
WINTER USE: We have people use them all winter long to help increase
humidity in an enclosed environment, which lowers the heating
bills and aids comfort, just like any humidifier.
Using powerful Twin Brushless Double Ball Bearing Motors this
Model merely sips power while streaming cool crisp air where &
when you need it. The Twin Motors have the capacity to produce
over 200 cubic feet per minute (cfm) at a velocity of 2,000 feet
per minute with a noise level of 59 dBA on high speed, which is
the same as typical human voice dBA. If you can visit while riding
in a commercial jet aircraft, you can easily visit while enjoying
the MightyKool's cool air or let it hum you to sleep. You can
adjust the level of power you prefer with the three-speed switch.
I received the Swampy MW1 on Wednesday.
Your communication and shipping on my order were accurate and
very prompt. The MW1 arrived well labeled and packed. The MW1
is easy to use. The fan is quiet and really moves a lot of air!
Initial testing at 10% humidity and 81 degree ambient temperature
produced an output vent temperature of 62 degrees. With the fan
set on medium speed this was more than adequate to cool the occupants
of our conversion van. The MW1 is very well constructed. I congratulate
you on an excellent design carried through with quality parts
and an attention to detail. For those who need a compact 12 volt
"swamp cooler" I can recommend the MW1. Thank You, L.J.
Morristown, AZ (They travel extensively & use the MW1 primarily
for camping including sleeping in their Van)
"Dear Swampy, We just wanted to drop you a line to tell you
how well our Mightykool (MW1) worked for us in our trailer on
the Playa at Black Rock City. We run off of solar so this was
a great way to cool off and be able to nap during the 90 degree
days. Thanks," C. and C. Jackson, WY
The MightyKool Models use a Custom Cooling Pad System
which is the Secret to it's Cooling Power, thereby eliminating
the typical pump always necessary in other evaporative coolers.
This saves energy and allows the MW1 to be down sized while producing
even cooler air that has always been associated with our Swampy
Models. Perfect Evaporation occurs in the MW1 resulting in cooler
temperatures in either dry or humid conditions as a pump adds
either too much or too little water, as there is no control on
what is needed.
The MightyKool MW1 Model on High speed moves about the
same amount of forward airflow as our very popular Swampy
Models S154 or T154 do on Medium Speed at a fraction of the energy
use. Be certain to order a set of Custom Filter Pads with your
order, as they should be changed once or twice during the season
or every 200 to 300 hours of cooling.
"I finally got a chance to use the Swampy MW1 over the 4th
of July weekend in 90-95 degree weather. This thing RULES! It
kept my whole camper cool on a medium setting and was turned down
to low at night. I am so impressed with the way it performed,
it was worth every dollar! Thanks again for all your help!"
C. E. Palisade, CO.
I received my Mighty Cool and it's a pretty awesome little contraption.
I have only used it twice now for short periods of time, but so
far am very pleased. I am excited to use it on a weekend camping
trip coming up in my trailer and later on at Burning Man. Thanks!!
A. M. Grand Junction, CO.
Use these in dry climates and you will have cool crisp air streaming
at you for 50 to 80 hours without recharging the typical 105 amp
hour Deep Cycle Battery you choose to purchase (we do not furnish
batteries). This is the only evaporative cooler that has been
used rather successfully in more humid climates by using water
only, however if it humid most of the time you should consider
one of our "Ice" Models. If
you wish you may click on Testimonials
regarding the MightyKool in Humid Areas. These Models will also operate efficiently on your
Solar System, using only 10.8 to 19.2 watts on 12-volts! The MightyKool
holds enough water to operate for two to four hours and you can
even add a few ice cubes if you so desire. The MW1 comes standard
with a float allowing a connection it to an Outside
Source of water for unlimited hours of use.
What are the Dimensions, Amperage Draw and Water Capacity?
One gallon (3.75 liters) of water will last around
two to three hours in the daytime and four to five hours during
the night when used for evaporative cooling in dry desert climates.
The "Ice Water" models typically use from 10 pounds
(4.5 kilograms) to 20 pounds (9.0 kilograms) of ice Per Hour,
depending on the ambient temperature and day or night operation.
A 105 Deep Cycle battery, "not being charged", allow
the MW1, WIN3 & MW2 to operate for 50
to 80 hours and the "Ice Water" models like the MK3,
MK4, MAC & M400 will operate for 25 to 35 hours
before the battery needs charging. The S154 & AC12
Models will operate about 8 hours before the battery would need
charging, as they use more energy.
Cooler Models MW1, MW2 & the WIN3 use Water only, however
ice could be added if you wish.
The AC 12 will not cool
with Water Only just Ice.
The M400, MK3, MK4, MAC,
& MG4 Provide; Dual Air Conditioning using Ice or Water
All Dual Systems automatically
dispose of the excess condensation collected